You can print your Parts List or export to Excel to further work with it. Ask your questions and share your experiences at Printers, Copiers Repair. You can now do servicing on the machine. A good first step is to turn the machine off and unplug it, then take off the covers and reset any connections or cables you can get to. Ricoh produces the service documentation for these machines. Replace the high voltage supply unit.
Let me know if u got help? The unlock will persist even if machine is rebooted. If you are a button puncher and enter this code wrong. These errors should occur only if there is some catastrophic failure within ImageControls that is unexpected see causes below. If no rebooting then you might enter a failed attempt that locks up the machine then enter a good attempt and it still does not work. Turn the machine off and on. If you stop charge leaking, the error will dissapear after restart. Find parts code of necessary spare parts at the illustrated Parts Catalog.
Posted on Nov 30, 2007 Hi, you can't reset this error by software!!! Most often there is a problem with charge leak in one of the drum units, or paper transfer unit. Check or replace the harness. If the problem persists, you should have a service technician take a look at it because it might need a board replaced. These types of errors are useful to developers and can be used to correct normal error conditions. Replace the drum unit or paper transfer unit.
. . . . . . .
. . . . .