You can't do both at the same time. This function notifies you that there is a incoming call while you are using the phone. The other stations not in use automatically activate their speakerphones and receive your page. Once the call is picked up, the indicator stays red. The transfer cancels, the line is put on hold, and the line indicator flashes green. Use the touch tone pad on your phone to enter up to six regional area codes. Your Owner's Manual provides information regarding operating instructions and user controls.
The party on the other end of the line cannot hear you, but you can still hear them. If the priority line is occupied, it selects an open line. Use the button to scroll through the phone book memories, or use the touch tone pad on your phone to enter the corresponding letters for the memory you want to review. Also print your name and address and a description of the defect. A shipping and handling fee will be charged upon ordering. Hang up the handset when finished.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. The line indicator for the line on hold flashes green. The phone stores the setting after the last button press. Wait for a dial tone. To answer the call, press that line button.
Move the microphone to approximately 2 to 3 inches from your mouth. If the priority line is occupied, it selects an open line. Also, from the display, you can find which line has message waiting. You may choose 100ms or 600ms. If selects an open line.
Basic Operation Your phone provides the convenience of accessing four separate telephone lines, each obtained from the telephone company and each having its own phone number. All six regional area code fields and Enter Number show in the display. Use the button to scroll to the memory you want to delete. Press the 4 key three times for the I. If you see a number with 11 digits i. Additionally, hands-free dialogue allows users to accept or make calls directly from the dial-in speakerphone base without the use of a handset.
Use the button to scroll to the desired memory record. Intercom indicator station address in the system. To make a call, press the line you want and dial the telephone number. Wait for a dial tone, then dial a phone number. Not applicable to model 25413. At the other stations, the indicator blinks red but no beep is heard. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name.
The default is 0 rings 7. Each station is interconnected to all others by an intercom. Press the 6 key two times for the letter N. Hang up the handset when finished. To manually reset the time and date, follow the steps below.
If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If you receive a call on a line other than the priority line, 1. This information will be valuable if service should be required during the warranty period. Use the button to scroll through the flash time options. Press the 5 key twice to go to memories starting with the letter K. Tap the up or down button to adjust the volume one level at a time. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately.